Application

Power cables for energy supply , power stations, for industry and distribution boards as well as in subscriber networks, where increased electrical protection are required.

Those cables are installed in open air, in underground, where mechanical damages are not to be expected, in water, indoors and in cable ducts.

The construction of these cables essentially relieves the montage cable joints.

Construction

• Plain copper conductor, as per DIN VDE 0295 cl.1 or cl.2, solid or stranded type (HD 383)

• PVC core insulation, YI4 as per DIN VDE 0207 part 4 (DIN VDE 0276 - 603, type DIV4)

• Colour coded to DIN VDE 0276-603.

• Cores twisted concentrically

• Inner covering rubber mass

• Concentric conductor (Ceander) of corrugated copper wires and one copper tape around inner covering

• PVC outer jacket, black, YM3 as per DIN VDE 0207 part 5 (type DMV 5 to DIN VDE 0276-603)

• PVC self-extinguishing, test met-hod B according to VDE 0472 part 804 (HD 405.1)

Technical data

• Temperature range
- laying -5°C to + 50°C
- stationary -30°C to + 70°C

• Working voltage Uo/U 0,6/1KV

• Test voltage 4KV

• Specific insulation resistance at 70°C min. 10¹⁰ Ω x cm

• Bending radius min: 12 x Ø _kabel

• Permissible tensile stress with cable grip, max 50 N/mm²